AQUAPHOBICBULLET SUMMARY
AQUAPHOBIC is a water-repellent damp-proofing agent based on oligomerous alkylalkoxysiloxanes used in an emulsifiable form. AQUAPHOBIC is diluted with clean tap water to form an opalescent micro-emulsion, which is used for facade or injection application of porous mineral building materials to repel surface water rising and/or dampness in a substrate. The AQUAPHOBIC treatment allows substrates to continue to breathe after application of the AQUAPHOBIC dilution.
Aquaphobic is a very depsicalised with high penetrating properties. Used diluted with was on site before use and applied over the finished tuckpointing. The rain and wash water is repelled off the wall. 
PLYCRETEPLYCRETE is an acrylic terpolymer incorporating cement and associated compounds. PLYCRETE is a waterproofing seal coating, designed to be applied onto damp surfaces subject to hydrostatic moisture.
PLYCRETE is a waterproof surface coasting and is suitable as a waterproof submergible coating in water containing structures. PLYCRETE has resilience and is quite tough. PLYCRETE has excellent adhesion to damp and porous substrates. PLYCRETE has excellent sag resistance when applied to vertical surfaces. PLYCRETE has excellent hydrostatic moisture resistance. |
B SILBULLET SUMMARY
B SIL is an aqueous emulsion ready to use designed as a water repellant for timber thus keeping it dry and age as normal if in an external or internal situation.
|
CORROSHIELD is a pure-acrylic based, resilient
and hard coating. The anti-corrosive agent in CORROSHIELD is a zinc phosphate complex compound. CORROSHIELD also contains leafing compounds and protective, neutral fillers to enhance rust prevention. Due to its unique formulation, CORROSHIELD can also be used as an insulation coating, having the ability to decrease the surface temperature of metal surfaces and the internal temperature of building in the region of 12°C. |
DAMP -PEL CBULLET SUMMARY
DAMP-PEL C is an aqueous emulsion concentrate which is used to make mineral building materials damp-proof and water repellent.
APPLICATIONS -Injection into building foundations at or below floor level to form a damp course. -Making plasterboard repellent. -Making fired clay and concrete products water repellent. Also used for rising damp injection. |
DAMP-PEL RTUBULLET SUMMARY
A silicone/siloxane emulsion mixed with distilled water which is supplied ready to use on walls.
Apply to Brickwork, concrete to resist water penetration (eg rain). APPLICATIONS -Injection into building foundations at or below floor level to form a damp course. -Making plasterboard repellent. -Making fired clay and concrete products water repellent. |