Calmarc Chemicals
  • Welcome
  • About Us
  • Products
    • Adhesives
    • Coatings
    • Cleaning Products
    • Concrete and Screed Additives
    • Gypsum Plaster Finishes
    • Mortar and Render Additives
    • Restoration Products
    • Sealers
    • Surface Protection
    • Tiling
    • Waterproof Membranes
  • Store
  • Gallery
  • Contact

tiling

Picture

TILEBOND

BULLET SUMMARY
HYPOBOND is a waterborne fine particle size pure acrylic adhesive  in an emulsified format.

HYPOBOND is designed to be injected by low pressure to form a bonding adhesive layer when set between delaminated substrates such as
 *    Bonding drummy ceramic tiles.
 *   Bonding drummy cement/sand render.
*    Bonding delaminated parquetry timber flooring.
 *   Bonding loose joints in timber      frame
 *  Bonding drummy float/set  coatings 
Picture

HYPOBOND

Click for DATA SHEET
BULLET SUMMARY
HYPOBOND is a waterborne fine particle size pure acrylic adhesive  in an emulsified format.

HYPOBOND is designed to be injected by low pressure to form a bonding adhesive layer when set between delaminated substrates such as
 *    Bonding drummy ceramic tiles.
 *   Bonding drummy cement/sand render.
*    Bonding delaminated parquetry timber flooring.
 *   Bonding loose joints in timber      frame
 *  Bonding drummy float/set  coatings 
Picture

TILECRETE

BULLET SUMMARY
A two part system.  The TILECRETE liquid is mixed with cement before use.  Suitable to lay most types of tiles especially those that will be covered with water.
Picture

AQUAPHOBIC

Click for DATA SHEET
BULLET SUMMARY
AQUAPHOBIC is a water-repellent damp-proofing agent based on oligomerous alkylalkoxysiloxanes used in an emulsifiable form. AQUAPHOBIC is diluted with clean tap water to form an opalescent micro-emulsion, which is used for facade or injection application of porous mineral building materials to repel surface water rising and/or dampness in a substrate.  The AQUAPHOBIC treatment allows substrates to continue to breathe after application of the AQUAPHOBIC dilution.
​Aquaphobic is a very depsicalised with high penetrating properties.  Used diluted with was on site before use and applied over the finished tuckpointing.  The rain and wash water is repelled off the wall.
Picture

REPEL M & W

BULLET SUMMARY
A grout additive to repel mould and water with the extra attribute of easing grout placement and improve colourant dispersion.
Home
About
products
store
contact
Copyright © 2015
  • Welcome
  • About Us
  • Products
    • Adhesives
    • Coatings
    • Cleaning Products
    • Concrete and Screed Additives
    • Gypsum Plaster Finishes
    • Mortar and Render Additives
    • Restoration Products
    • Sealers
    • Surface Protection
    • Tiling
    • Waterproof Membranes
  • Store
  • Gallery
  • Contact